Without Scan Tool

DIAGNOSTIC TROUBLE CODES CLEARING

(a) Turn the ignition switch to ON.

HINT: Keep the vehicle stationary.





(b) Using SST, connect the terminal Tc to E1 of the DLC1.
SST 09843-18020





(c) Clear the diagnostic trouble codes stored in ECU by depressing the brake pedal 8 or more times within 3 seconds.
HINT: Cancellation can also be done by removing the REAR - ANTILOCK fuse, but in this case, other memory systems will also be cancelled out





(d) Check that the warning light shows the normal code. If the warning light still shows the diagnostic trouble codes. check the cause and repair or replace the trouble parts, then clear the diagnostic trouble codes again.
(e) Disconnect the terminal Tc from E1 of the DLC
(f) Check that the warning light goes off.