Entertainment Systems

DIAGNOSTIC TROUBLE CODE CHART






HINT: The DTC of the Main AVC-LAN circuit is displayed on the radio receiver assy or radio and navigation assy, and the DTC of the Sub AVC-LAN circuit is displayed on the television display assy.
Titles for each unit are stated in the following order: parts name, (physical address) and [name indicated on the DTC display].

1. MULTI-DISPLAY CONTROLLER SUB-ASSY (Physical address: 16C) [RSE ECU]

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code is stored when 180 seconds have passed after the power supply connector is pulled out after engine start.
- *3: This code may be stored when the engine key is turned again after the engine starts.
- *4: This code may be stored when the engine key is turned again in 1 minute after the engine starts.

Sub (16C)-AVC-LAN L-1

D8 - E4:

Logical address: 01 (Communication control)

2. TELEVISION DISPLAY ASSY (Physical address: 1B0) [Rr TV]

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code may be stored when the engine key is turned again in 1 minute after the engine starts.
- *3: This code may be stored when the engine key is turned again after the engine starts.
- *4: When 210 seconds have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

22 - E2:

E3 - E4:

a. Logical address: 01 (Communication control)

42 - 52:

b. Logical address: 44 (DVD)