Front Seat Assembly (For Power Seat)

DISASSEMBLY

CAUTION: Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

1. REMOVE RECLINING POWER SEAT SWITCH KNOB






a. Using a screwdriver, detach the reclining power seat switch knob.

HINT: Tape the screwdriver tip before use.

2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB






a. Using a screwdriver, detach the slide and vertical power seat switch knob.

HINT: Tape the screwdriver tip before use.

3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY






a. Disconnect the 2 hooks.
b. Remove the 5 screws.






c. Disengage the claw and separate the front seat cushion shield assembly.
d. Disconnect the connector from the front power seat lumbar switch.

4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD






a. Remove the screw.
b. Detach the 2 claws and remove the front inner No. 1 seat cushion shield.

5. REMOVE FRONT LUMBAR POWER SEAT SWITCH






a. Remove the 2 screws and front lumbar power seat switch.

6. REMOVE FRONT SEAT INNER BELT ASSEMBLY
7. REMOVE FRONT INNER SEAT CUSHION SHIELD






a. Remove the screw.
b. Using a clip remover, detach the clip.
c. Using a screwdriver, detach the claw and remove the front inner seat cushion shield.

HINT: Tape the screwdriver tip before use.

8. REMOVE LOWER SEAT TRACK SPACER






a. Remove the 2 screws and lower seat track spacer.

9. REMOVE FRONT POWER SEAT SWITCH






a. Remove the 3 screws.
b. Disconnect the connector and remove the front power seat switch.

10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION ASSEMBLY
a. Disconnect the 2 clamps.






b. Remove the 4 hooks.
c. Using a screwdriver, detach the hooks and remove the front separate type seat cushion assembly.






11. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER (for Except Sports Seat Type)






a. Remove the 16 hog rings and front separate type seat cushion cover from the seat cushion pad.

12. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER (for Sports Seat Type)






a. Remove the 17 hog rings and front separate type seat cushion cover from the seat cushion pad.

13. REMOVE FRONT SEAT BACK BOARD SUB-ASSEMBLY






a. Remove the 2 screws.
b. Disconnect the 14 clamps and front separate type seat back cover.
c. Pull the seat back board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the seat back board.

14. REMOVE FRONT SEAT HEADREST SUPPORT






a. Detach the 2 claws and remove the headrest support.

15. REMOVE FRONT SEAT HEADREST SUPPORT
16. REMOVE FRONT SEPARATE TYPE SEAT BACK ASSEMBLY






a. Remove the 2 hog rings and 3 hooks.
b. Remove the nut and 2 seat back cover brackets.






17. REMOVE FRONT SEPARATE TYPE SEAT BACK COVER (for Except Sports Seat Type)






a. Remove the 10 hog rings and front separate type seat back cover from the seat back pad.

18. REMOVE FRONT SEPARATE TYPE SEAT BACK COVER (for Sports Seat Type)






a. Remove the 14 hog rings and front separate type seat back cover from the seat back pad.

19. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY






a. Disconnect the connector.
b. Remove the 2 screws and lumbar support adjuster assembly.

20. REMOVE RECLINING ADJUSTER INSIDE COVER RH
a. Disconnect the harness.
b. Remove the 2 screws and reclining adjuster inside cover RH.






21. REMOVE RECLINING ADJUSTER INSIDE COVER LH
a. Disconnect the harness.
b. Remove the 2 screws and reclining adjuster inside cover LH.






22. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER RH






a. Remove the screw.
b. Detach the claw and remove the seat reclining adjuster inside cover RH.

23. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER LH






a. Remove the screw.
b. Detach the claw and remove the seat reclining adjuster inside cover LH.

24. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH






a. Remove the screw and detach the hook of the front lower seat cushion shield LH.

25. REMOVE FRONT LOWER SEAT CUSHION SHIELD
26. REMOVE SEAT POSITION SENSOR (for Driver Side)
27. REMOVE FRONT SEAT WIRE

REASSEMBLY

CAUTION: Wear protective gloves. Sharp areas on the seat adjuster may injure your hands.

1. INSTALL FRONT SEAT WIRE
2. INSTALL SEAT POSITION SENSOR (for Driver Side)
3. INSTALL FRONT LOWER SEAT CUSHION SHIELD
4. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH
5. INSTALL SEAT RECLINING ADJUSTER INSIDE COVER LH
6. INSTALL SEAT RECLINING ADJUSTER INSIDE COVER RH
7. INSTALL RECLINING ADJUSTER INSIDE COVER LH
8. INSTALL RECLINING ADJUSTER INSIDE COVER RH
9. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY
10. INSTALL FRONT SEPARATE TYPE SEAT BACK COVER (for Except Sports Seat Type)






a. Using hog ring pliers, install the front separate type seat back cover to the front seat back pad with 16 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

11. INSTALL FRONT SEPARATE TYPE SEAT BACK COVER (for Sports Seat Type)






a. Using hog ring pliers, install the front separate type seat back cover to the front seat back pad with 14 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

12. INSTALL FRONT SEPARATE TYPE SEAT BACK ASSEMBLY






a. Fully cover the airbag with the 2 seat back cover brackets and tighten the nut.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

NOTICE:
- For vehicles with side airbags, the seat back cover must be securely installed. Otherwise, the side airbags may not deploy properly.
- Make sure that the strap is not twisted after installing the bracket.
- Install the bracket securely.

b. Engage the 3 hooks.






c. Using hog ring pliers, install 2 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

13. INSTALL FRONT SEAT HEADREST SUPPORT
14. INSTALL FRONT SEAT HEADREST SUPPORT
15. INSTALL FRONT SEAT BACK BOARD SUB-ASSEMBLY
16. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER (for Except Sports Seat Type)






a. Using hog ring pliers, install the front separate type seat cushion cover to the front separate type seat pad with 16 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

17. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER (for Sports Seat Type)






a. Using hog ring pliers, install the front separate type seat cushion cover to the front separate type seat pad with 17 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

18. INSTALL FRONT SEPARATE TYPE SEAT CUSHION ASSEMBLY
19. INSTALL FRONT POWER SEAT SWITCH
20. INSTALL LOWER SEAT TRACK SPACER
21. INSTALL FRONT INNER SEAT CUSHION SHIELD
22. INSTALL FRONT LUMBAR POWER SEAT SWITCH
23. INSTALL FRONT SEAT INNER BELT ASSEMBLY
24. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD
25. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
26. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
27. INSTALL RECLINING POWER SEAT SWITCH KNOB