Cursor or MAP Rotates When Vehicle Stopped

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Cursor or Map Rotates when Vehicle Stopped

Cursor or Map Rotates when Vehicle Stopped

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CONDITION





(a) Check with the customer if the vehicle has been turned by a turntable at parking.
OK:
Vehicle has not been turned by turntable.
HINT: If the engine switch is turned on (ACC) or on (IG) while the vehicle is being turned by a turntable, the system may store the angular velocity at this time. For this reason, the vehicle position cursor may deviate.

NG -- TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE