Entry Lock And Unlock Switch (for Rear)

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH (for Rear): INSPECTION

INSPECTION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. INSPECT ENTRY LOCK AND UNLOCK SWITCH
(a) Disconnect the connector.
(b) Remove the outside handle.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





- If the result is not as specified, replace the entry lock and unlock switch.