Removal

HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Front Side): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION Removal

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE NO. 1 SWITCH HOLE BASE Removal

8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal







9. REMOVE ROOM TEMPERATURE SENSOR
(a) Disconnect the connector.
(b) Disconnect the hose and remove the sensor.