Removal

3UR-FE ENGINE CONTROL: HEATED OXYGEN SENSOR: REMOVAL

REMOVAL
CAUTION:
- The procedures should be performed by at least 2 people.
- Wear protective gloves when removing the exhaust pipe.
- The exhaust pipe is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe has cooled down before removing it.

1. REMOVE NO. 2 ENGINE UNDER COVER Removal

2. REMOVE TAILPIPE ASSEMBLY Removal

3. REMOVE CENTER EXHAUST PIPE ASSEMBLY Removal

4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY Removal

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)






(a) Using SST, remove the sensor.
SST: 09224-00010
7. REMOVE NO. 2 HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)






(a) Using SST, remove the sensor.
SST: 09224-00010