Removal

HEATING / AIR CONDITIONING: DUCT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE REAR NO. 1 SEAT ASSEMBLY LH
(a) Remove the rear No. 1 seat assembly Removal.
3. REMOVE REAR NO. 1 SEAT ASSEMBLY RH
(a) Remove the rear No. 1 seat assembly Removal.
4. REMOVE REAR NO. 2 SEAT ASSEMBLY LH
(a) Remove the rear No. 2 seat assembly Removal.
5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH
(a) Remove the rear No. 2 seat assembly Removal.
6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR SCUFF PLATE RH Removal

8. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE Removal

9. REMOVE REAR SEAT COVER CAP Removal

10. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH Removal

11. REMOVE REAR SEAT COVER CAP Removal

12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH Removal

13. REMOVE REAR NO. 1 SEAT PROTECTOR Removal

14. REMOVE REAR NO. 2 SEAT PROTECTOR Removal







15. REMOVE FRONT FLOOR CARPET ASSEMBLY
(a) Fold back the floor carpet.
HINT: Fold back the carpet until it is possible to remove the rear No. 6 air duct.

16. REMOVE REAR NO. 6 AIR DUCT
(a) Disconnect the 2 connectors.
(b) Remove the 5 screws and duct.





17. REMOVE DUCT TEMPERATURE SENSOR
(a) Detach the 4 claws and remove the 2 sensors.