Installation

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION

INSTALLATION





1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a) Install the ECU with the 2 screws.
Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)
(b) Connect the 2 connectors.
NOTE: The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When connecting them, connect the connectors of the same color.

2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY Reassembly

3. INSTALL STEERING COLUMN ASSEMBLY
HINT: Refer to the instructions for installation of the steering column assembly Installation.