Cylinder Head
CYLINDER HEAD LHStep 1:
Set the plate washer to the cylinder head bolt.
Install and uniformly tighten the 10 cylinder head bolts and plate washers in the sequence shown in the illustration.
Torque 32 Nm (326 kgf-cm, 24 ft-lbf)
If any one of the cylinder head bolts does not meet the torque specification, replace the cylinder head bolt.
The cylinder head bolts are tightened in 3 progressive steps.
Step 2:
Mark the cylinder head bolt head with paint as shown in the illustration.
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Step 3:
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Check that the painted marks are now facing rearward.
CYLINDER HEAD RH
Step 1:
Set the plate washer to the cylinder head bolt.
Install and uniformly tighten the 10 cylinder head bolts and plate washers in the sequence shown in the illustration.
Torque 32 Nm (326 kgf-cm, 24 ft-lbf)
If any one of the cylinder head bolts does not meet the torque specification, replace the cylinder head bolt.
The cylinder head bolts are tightened in 3 progressive steps.
Step 2:
Mark the cylinder head bolt head with paint as shown in the illustration.
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Step 3:
Tighten the cylinder head bolts another 90° in the sequence shown in step 1.
Check that the painted marks are now facing rearward.