Installation

LIGHTING: FOG LIGHT ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.

1. INSTALL FOG LIGHT ASSEMBLY LH





(a) for Steel Type Bumper:
(1) Attach the 2 claws to install the fog light.
(2) Attach the tabs on the fog light aiming screw to the bumper.
(3) Connect the connector.





(b) for Resin Type Bumper:
(1) Attach the 2 claws to install the fog light.
(2) Attach the tabs on the fog light aiming screw to the bumper.
(3) Connect the connector.
2. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH