Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

(a) Install the No. 1 rear bumper reinforcement with the 4 nuts.





Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

2. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the rear bumper energy absorber.





3. INSTALL REAR BUMPER SIDE RETAINER LH

(a) Engage the guide and 4 claws.





(b) Install the rear bumper side retainer LH with the 3 screws.

4. INSTALL REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

5. INSTALL REAR NO. 1 SPOILER

(a) Engage the 4 guides.





(b) Install the rear No. 1 spoiler with the 5 clips.

6. INSTALL REAR SIDE SPOILER SUB-ASSEMBLY LH

(a) Engage the claw and clip.





(b) Install the rear side spoiler sub-assembly LH with the 3 screws.

7. INSTALL REAR SIDE SPOILER SUB-ASSEMBLY RH

(a) Engage the claw and clip.





(b) Install the rear side spoiler sub-assembly RH with the 3 screws.