Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Engage the clamp.

(d) Install the headlight assembly with the bolt and 2 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL RADIATOR SUPPORT OPENING COVER Installation

4. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL REAR NO. 3 FLOOR BOARD Installation

7. INSTALL REAR DECK FLOOR BOX Installation

8. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

9. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Adjustments

10. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

11. PREPARE FOR HEADLIGHT AIMING (Using a screen) Adjustments

12. INSPECT HEADLIGHT AIMING Adjustments

13. ADJUST HEADLIGHT AIMING Adjustments

14. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) Adjustments

15. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

16. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

17. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments