Removal

P410 HYBRID TRANSMISSION / TRANSAXLE: SHIFT CONTROL ACTUATOR: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE SHIFT CONTROL ACTUATOR ASSEMBLY

(a) Disconnect the connector from the shift control actuator assembly.





(b) Using pliers or an equivalent tool, turn the shift control actuator bolt covers counterclockwise and remove the 3 shift control actuator bolts and shift control actuator assembly.









HINT
* Use pliers or an equivalent tool to initially rotate the cover, and then proceed to remove the shift control actuator bolt and cover by pulling the cover towards the front of the vehicle by hand while rotating the bolt counterclockwise.
* This actuator is a precision instrument. Do not strike it with a plastic hammer or the like during installation.
* This actuator detects its own position when a battery is reinstalled. Thus it does not require initialization.