Meter / Gauge System

METER: METER / GAUGE SYSTEM: TERMINALS OF ECU

1. CHECK COMBINATION METER ASSEMBLY (METER ECU)





(a) Disconnect the E19 meter connector.

(b) Measure the voltage and resistance of the wire harness side connector.





* If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the E19 meter connector.

(d) Measure the voltage of the connector.









(e) *: w/ Smart Key System

* If the result is not as specified, the combination meter may be malfunctioning.