Front Passenger Side Power Window Does Not Operate With Front Passenger Side Power Window Switch

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch
- Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

DESCRIPTION

* When the engine is running or the ignition switch is ON and the window lock switch of the power window regulator master switch is normal, the front passenger door power window regulator motor is driven by operating the front passenger door power window regulator switch.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK WIRE HARNESS (INPUT POWER SUPPLY)

(a) Disconnect the G3 switch connector.





(b) Turn the ignition switch ON.

(c) Measure the voltage of the wire harness side connector.

Standard voltage:





NG -- INSPECT FUSE AND REPLACE IT IF NECESSARY, OR INSPECT AND REPAIR WIRE HARNESS AND CONNECTOR
OK -- Continue to next step.

2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Front Passenger Side)

(a) Remove the power window regulator switch.





(b) Measure the resistance of the switch when the switch is operated.

Standard resistance:





NG -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Front Passenger Side)
OK -- Continue to next step.

3. CHECK WIRE HARNESS (REGULATOR SWITCH - REGULATOR MOTOR)





(a) Disconnect the G3 switch connector.

(b) Disconnect the G2 motor connector.

(c) Measure the resistance of the wire harness side connectors.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR
OK -- Continue to next step.

4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side)





(a) Remove the power window regulator motor.

(b) Apply the battery voltage to connector terminals 1 and 2.

NOTICE:
Do not apply the battery voltage to any terminals except terminals 1 and 2.

(c) Check that the motor gear rotates smoothly as follows.

OK:





NG -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side)
OK -- Continue to next step.

5. CHECK WIRE HARNESS (MASTER SWITCH - REGULATOR SWITCH)





(a) Disconnect the H2 switch connector.

(b) Disconnect the G3 switch connector.

(c) Measure the resistance of the wire harness side connectors.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR

OK -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY