Reassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

(a) Engage the 13 clips.





(b) Install the No. 2 instrument panel garnish sub-assembly with the 2 screws [C] or [D].





2. INSTALL NO. 2 HEATER TO REGISTER DUCT

(a) Install the No. 2 heater to register duct with the 2 screws [C] or [D].





3. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation

4. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Engage the 2 guides.





(b) Install the defroster nozzle assembly with the 3 screws [C] or [D].

5. INSTALL ANTENNA CORD SUB-ASSEMBLY Installation

6. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Engage the 2 claws.





(b) Install the No. 2 side defroster nozzle duct with the screw [C] or [D].

7. INSTALL NO. 3 HEATER TO REGISTER DUCT

(a) Install the No. 3 heater to register duct with the 3 screws [C] or [D].





(b) Install the clip.

8. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Engage the 2 claws.





(b) Install the No. 1 side defroster nozzle duct with the screw [C] or [D].

9. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 3 screws [C] or [D].





(b) Install the clip.

10. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Installation

11. INSTALL NO. 1 INSTRUMENT PANEL PIN

(a) Install the 4 No. 1 instrument panel pins with the 4 screws [C] or [D].