Removal

THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Center Floor): REMOVAL

1. REMOVE REAR SEAT ASSEMBLY RH

Removal

2. REMOVE REAR SEAT ASSEMBLY LH

Removal

3. REMOVE DECK BOARD ASSEMBLY Removal

4. REMOVE NO. 1 DECK BOARD Removal

5. REMOVE NO. 2 DECK BOARD Removal

6. REMOVE REAR DECK FLOOR BOX Removal

7. REMOVE DECK FLOOR BOX RH Removal

8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

9. REMOVE FRONT DECK FLOOR BOX Removal

10. REMOVE REAR NO. 1 FLOOR BOARD Removal

11. REMOVE BACK DOOR SCUFF PLATE Removal

12. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

(a) Disconnect the rear door opening trim weatherstrip LH.

13. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Removal

14. REMOVE FRONT DECK SIDE TRIM COVER LH Removal

15. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH Removal

16. REMOVE NO. 2 ROOM LIGHT ASSEMBLY Removal

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

18. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT
Use the same procedure for the RH side and LH side.

19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

HINT
Use the same procedure for the RH side and LH side.

20. REMOVE FRONT DECK SIDE TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side.

21. REMOVE REAR DECK TRIM COVER Removal

22. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

24. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

(a) Remove the clip from the floor carpet.





(b) Disengage the floor carpet hook.

(c) Turn over the floor carpet as shown in the illustration.





(d) Disengage the 2 clamps.





(e) Disconnect the connector to remove the No. 3 indoor electrical key antenna assembly.

NOTICE:
Be careful when removing the electrical key antenna. If the antenna is dropped, replace it with a new one.