Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Engage the clamp.

(c) Engage the claw.





(d) Install the headlight assembly with the bolt and 2 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY

Installation

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL DECK FLOOR BOX RH Installation

5. INSTALL REAR DECK FLOOR BOX Installation

6. INSTALL NO. 1 DECK BOARD Installation

7. INSTALL NO. 2 DECK BOARD Installation

8. INSTALL DECK BOARD ASSEMBLY Installation

9. ADJUST HEADLIGHT AIMING

Adjustments

10. ADJUST FOG LIGHT AIMING (w/ Fog Light)

Adjustments