Removal

SEAT: SEAT HEATER SWITCH: REMOVAL

1. PRECAUTION

CAUTION:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE CONSOLE BOX ASSEMBLY

Removal

9. REMOVE INTEGRATION CONTROL AND PANEL Removal

10. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal

11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

12. REMOVE SEAT HEATER SWITCH

(a) Disengage the 2 claws and remove the seat heater switch as shown in the illustration.