Installation

1GR-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY





NOTICE:
* Avoid any physical impact to the accelerator pedal assembly.
* Do not disassemble the accelerator pedal assembly.

(a) Install the accelerator pedal with the 2 bolts.

Torque : 5 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the accelerator position sensor connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)