Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the exhaust muffler assembly. Refer to Exhaust Muffler Replacement (LCV,LUK) Service and RepairExhaust Muffler Replacement (LTG) Service and Repair.

3. Using a suitable jack stand, support the rear of the powertrain.




4. Remove the transmission mount to bracket through bolt (1).




5. Remove the four transmission mount bracket fasteners (1).




6. Remove the rear mount to frame fasteners (1, 2), then remove the mount and bracket from the vehicle.

Installation Procedure





Caution: Refer to Fastener Caution Fastener Caution.

1. Install the four transmission mount bracket to transmission fasteners (1) and tighten to 100 Nm (74 lb ft).




2. Install the transmission mount to bracket through bolt (1) and tighten to 105 Nm (77 lb ft).





Note: Use NEW bolts only.

3. Install the rear mount to frame fasteners (1, 2) and tighten to 100 Nm (74 lb ft) plus 120-130 degrees.

4. Remove the jack stand.

5. Install the exhaust muffler assembly. Refer to Exhaust Muffler Replacement (LCV,LUK) Service and RepairExhaust Muffler Replacement (LTG) Service and Repair.

6. Lower the vehicle.