Headliner - Installation

INSTALLATION






NOTE:
In the event the headliner is damaged or creased during removal, it will need to be replaced with a new headliner.

1. Install the headliner through the rear liftgate opening.

2. Install the push pins (4) holding the headliner (2) in place.

3. Connect the headliner wiring connector (3) at the A-pillar.

CAUTION:
Ensure the coat hook locator tab is properly seated in the coat hook mounting bracket. Failure to seat the coat hooks properly will cause the locator tab to break and the coat hooks will not latch in the stowed position.

4. Install the coat hooks and coat hook fasteners.

5. Install both left and right sun visor supports, Visor Support - Installation.

6. Install both left and right sun visors, Visor - Installation.

7. Install the rear overhead console, Overhead Console - Installation.

8. Install the front overhead console,

9. Install both the left and right upper D-pillar trim, D-Pillar Trim Panel - Installation.

10. Install both the left and right upper C-pillar trim, C-Pillar Trim Panel - Installation.

11. Install both the left and right upper B-pillar trim, B-Pillar Trim Panel - Installation.

12. Install both the left and right A-pillar trim, A-Pillar Trim Panel - Installation.

13. Connect the negative battery cable.