Test 14A - CCD Communication

Test 14-A, Repairing CCD Communication (Part 1 Of 2):

Test 14-A, Repairing CCD Communication (Part 2 Of 2):

NOTE:
- A single asterisk (*) in the diagnostic chart indicates the Verification Test must be performed. Verification Tests
- A double asterisk (**) in the diagnostic chart indicates a connector must be checked, then cleaned or repaired as necessary.

NAME OF CODE:
Chrysler Collision Detection (CCD) communications.

WHEN MONITORED:
Ignition ON.

SET CONDITION:
This diagnostic trouble code is set when the Controller Antilock Brake (CAB) cannot transmit the traction control/ABS status message for 4 seconds. If the Body Control Module (BCM) does not receive the traction control/ABS status message, the BCM will provide a ground path and illuminate the ABS warning lamp.

POSSIBLE CAUSES:
- CCD bus failure
- Other modules linked to the CCD bus

CAB Power Feed Schematic:

Controller Antilock Brake Connector: