RH

Exhaust Manifold RH
Removal
1. Remove the generator.
2. Remove the exhaust flexible pipe.
3. Disconnect the RH heated oxygen sensor (HO2S) electrical connector.





4. Disconnect the exhaust gas recirculation (EGR) tube nut to the exhaust manifold.





5. Remove the RH manifold.
^ Discard the gasket.

Installation





1. Position a new gasket and install the exhaust manifold nuts in the sequence shown.





2. Connect the EGR tube nut to the exhaust manifold.
3. Connect the RH HO2S electrical connector.
4. Install the exhaust flexible pipe.
5. Install the generator.