Sunroof / Moonroof Wiring Harness: Service and Repair

ROOF OPENING PANEL MOTOR WIRING HARNESS

Removal and Installation
1. Remove the headliner.
2. Disconnect the electrical connectors to the roof opening panel sliding glass motor, shade motor and main harness.







3. NOTE: Make note of all the cable wrap locations attaching the harness to the drive tubes, they must be reinstalled at the exact same locations.

Remove the cable wraps and the wiring harness.

4. NOTE: Be careful not to overtighten cable wraps during assembly to prevent crimping the cable sheath.

To install, reverse the removal procedure.