Test A: The Roof Opening Panel Has Excessive Wind Noise

PINPOINT TEST A: THE ROOF OPENING PANEL HAS EXCESSIVE WIND NOISE

Normal Operation
When the roof opening panel glass is completely closed, it is flush with the roof panel and correctly sealed. When the roof opening panel glass is in the VENT position, the leading edge of the glass panel should contact the primary seal.

This pinpoint test is intended to diagnose the following:
- Damaged or poorly fitting roof opening panel primary seal
- Damaged or poorly fitting roof opening panel fixed glass front seal
- Damaged or poorly fitting roof opening panel front trim panel seal
- Damaged or poorly fitting roof opening panel side trim panel seal
- Damaged or poorly fitting roof opening panel fixed glass side seal
- Damaged or poorly fitting deflector assembly

A1-A3: