Steering Wheel Switch

Steering Wheel Switch

High Series

NOTE: RH shown, LH similar









Low Series

NOTE: RH shown, LH similar









Removal and Installation

High and Low Series

1. Remove the driver air bag module. For additional information, refer to Supplemental Restraint System Driver Air Bag Module.

Low Series

2. Using a suitable flat-bladed tool, detach the steering wheel switch from the steering wheel.
- Disconnect the electrical connector and remove the switch.

High Series

3. Remove the steering wheel switch bezel.
- Disconnect the steering wheel switch electrical connector.

4. Remove the 2 screws and the steering wheel switch.

High and Low Series

5. To install, reverse the removal procedure.