Selector Lever Mechanism

Selector Lever Mechanism









Removal and Installation

1. NOTE: To access the top selector lever mechanism bolts, position the selector lever in NEUTRAL before removing the selector lever.

Remove the selector lever. For additional information, refer to Selector Lever Selector Lever.

2. Disconnect the Brake Shift Interlock Actuator (BSIA) electrical connector.





3. Disconnect the selector lever cable.





4. Remove and discard the 3 bolts and remove the selector lever mechanism.
- To install, tighten to 10 Nm (89 lb-in).





5. To install, reverse the removal procedure.