Alarm System Transmitter: Service and Repair

Passive Anti-Theft System (PATS) Transceiver









Removal and Installation

1. Remove the the lower steering column shroud. For additional information, refer to Steering Column Steering Column Shroud.

2. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.

3. Using a suitable tool (such as a dentist pick), unclip the 2 tabs and remove the PATS transceiver.

4. NOTE: Replacement of the PATS transceiver does not require the Integrated Keyhead Transmitters (IKTs) keys to be programmed into the Body Control Module (BCM).

To install, reverse the removal procedure.