EGR Valve: Service and Repair

Linear EGR Valve Central MFI:

NOTE: Do not try to disassemble the linear Exhaust Gas Recirculation (EGR) valve. It is serviced only as a complete assembly.

REMOVE OR DISCONNECT
1. Electrical connector.
2. Valve to flange attaching bolts.
3. Linear EGR valve.
4. Flange gasket.

CAUTION: The linear EGR valve is an electrical component. Do not soak it in any liquid cleaner or solvent, as damage may result.

Clean:
^ Linear valve gasket surface.

INSTALL OR CONNECT
1. Flange gasket.
2. Linear EGR valve.
3. Valve to flange attaching bolts.

Tighten
^ Valve to flange attaching bolts to 24 Nm (17 lb. ft.).

4. Electrical connector.