DTC 53

DTC 53: Motor Stuck ON
1. Clear the DTC using the HDS.
2. Disconnect the HDS from the 16P DLC.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicle.
Does the ABS indicator come on, and is DTC 53 indicated?
YES - Go to step 5.
NO - The system is OK at this time.





5. Measure the voltage between the ABS/TCS control unit 47P connector terminal No. 47 and body ground.
Is there less than 0.1 V?
YES - Check for loose terminals in the ABS/TCS control unit 47P connector. If necessary, substitute a known-good ABS/TCS modulator-control unit, and recheck.
NO - Repair open in the wire between the ABS/TCS modulator-control unit and body ground (G203).