Side Engine Mount Replacement

Side Engine Mount Replacement

1. Support the engine with a jack and a wood block under the oil pan.

2. Remove the ground cable (A), then remove the side engine mount bracket (B).






3. Remove the side engine mount (A).





4. Install the side engine mount, then tighten new side engine mount mounting bolts (B).

5. Install the side engine mount bracket (A) with a new bolt (B).

NOTE: Make sure to align the projection (C) with the mark (D) when you install the bracket as shown in the illustration.





6. Loosely install new side engine mount/bracket assembly mounting nuts (E), and install the ground cable (F).

7. Remove the jack and the wood block from under the oil pan.

8. Remove the air cleaner Service and Repair.

9. Loosen the transmission mount bracket mounting bolts (A) and nuts (B).

M/T model





CVT model





10. Raise the vehicle on the lift.

11. Loosen the torque rod mounting bolt (A) and nut (B).

M/T model





CVT model





12. Lower the vehicle on the lift.

13. Tighten the side engine mount/bracket assembly mounting nuts.






14. Tighten the transmission mount mounting bolts and nuts in the numbered sequence shown.

M/T model





CVT model





15. Raise the vehicle on the lift.

16. Tighten the torque rod mounting bolt and nut in the numbered sequence shown.

M/T model





CVT model





17. Lower the vehicle on the lift.

18. Install the air cleaner Service and Repair.