Dash Side Finisher

BODY SIDE TRIM


DASH SIDE FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL
1. Remove front kicking plate inner. Kicking Plate Inner.
2. Remove dash side finisher fixing clip (A).





3. Disengage dash side finisher (1) fixing clips (A) using a remover tool (B) as shown by the arrow in the figure, and then remove dash side finisher.

Triangle : Pawl

INSTALLATION
Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
- When installing dash side finisher, check that clips are securely fitted in body panel holes, and press clips in.