C-Pillar Trim Panel - Removal

REMOVAL

Special Tools:










1. Remove the screw (1) that secures the rear outboard seat belt (4) lower anchor and the rear seat back bracket (2) to the rear floor panel (3).





2. Position the door seal (1) aside.





3. Using a trim stick or equivalent, disengage the retaining clips that secure the side upper trim (1) to the body.
4. Release the tether from the trim and remove the headliner trim.





5. Using a trim stick or equivalent, disengage the retaining clips (2) that secure the upper trim (3) to the pillar and remove the trim panel.
6. Remove the seat belt from the trim.