Terrain Select Switch - Removal

REMOVAL

Special Tools:










1. Using trim stick (1) or equivalent, separate the retaining ring (3) from the knob (2) and slide down the shifter shaft.





2. Remove the yellow stamped spring clip (2) from the knob (1) by grabbing the exposed tab with pliers and pulling straight out.
3. Pull the knob (2) off of the shift shaft.





4. Using trim stick or equivalent, release the clip fasteners and separate the console bezel.





5. With the bezel tilted up in the back, disconnect the wiring harness connector (3), then press the four retaining clips (1) in and push the terrain select switch (2) up through the bezel to remove.