Installation

SUSPENSION: FRONT STABILIZER BAR:

INSTALLATION

1. INSTALL STABILIZER BAR FRONT
2. INSTALL FRONT STABILIZER BAR BUSH NO. 1






(a) Install the 2 front stabilizer bar bush No. 1.
- Install the bushing to the inner side of the bushing stopper on the stabilizer bar.
- Install the stabilizer bush No. 1 as the protrusion to be on the inner side of the vehicle.

3. INSTALL FRONT STABILIZER BRACKET NO. 1 LH






(a) Install the front stabilizer bracket No. 1 LH with the 2 bolts.
Torque: 40 Nm (410 kgf-cm, 30 ft-lbf)
4. INSTALL FRONT STABILIZER BRACKET NO. 1 RH
HINT: Install the RH side by following the same procedures with the LH side.

5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH






(a) Install the front stabilizer link assembly LH with the 2 nuts.
Torque: 70 Nm (710 kgf-cm, 52 ft-lbf)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Install the RH side by following the same procedures with the LH side.

7. INSTALL FRONT WHEELS
Torque: 112 Nm (1,140 kgf-cm, 83 ft-lbf)