Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT DOOR SCUFF RH PLATE
HINT: Use the same procedures for the front door scuff RH plate and the front door scuff LH plate Removal.

4. REMOVE FRONT DOOR OPENING TRIM RH WEATHERSTRIP
5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedures for the cowl side trim sub-assembly RH and the cowl side trim sub-assembly LH Removal.

6. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY Removal
7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
8. DISCONNECT FRONT PASSENGER AIRBAG ASSEMBLY CONNECTOR





(a) Disconnect the 2 connectors from the front passenger airbag assembly.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

9. REMOVE INSTRUMENT PANEL ASSEMBLY
HINT: Refer to the procedures up to "REMOVE INSTRUMENT PANEL ASSEMBLY" Removal.

10. REMOVE INSTRUMENT PANEL BRACKET SUB-ASSEMBLY CENTER Disassembly
11. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY





(a) Remove the 2 screws.





(b) Release the rear side airbag door from the hook by slightly deflecting it and roll the front passenger airbag assembly forward.
(c) Release the front side airbag door from the other hook and remove the front passenger airbag assembly.