Pinpoint Tests AJ: The Turn Signal On Warning Chime Is Inoperative

Instrumentation, Message Center and Warning Chimes

Pinpoint Test AJ: The Turn Signal On Warning Chime Is Inoperative

Normal Operation

The turn signal on warning chime sounds when the vehicle travels more than 3.2 km (2.0 miles) with the turn signal on. The Smart Junction Box (SJB) communicates the turn signal switch status to the Instrument Panel Cluster (IPC) over the Medium Speed Controller Area Network (MS-CAN). The IPC receives the odometer rolling count data from the PCM over the High Speed Controller Area Network (HS-CAN).

This pinpoint test is intended to diagnose the following:

- Odometer concern
- IPC

PINPOINT TEST AJ: THE TURN SIGNAL ON WARNING CHIME IS INOPERATIVE

-------------------------------------------------
AJ1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION

- Ignition OFF.
- Place the ignition in the ACC mode.
- Open the LH front door and observe the key-in-ignition warning chime operation.
- Does the key-in-ignition warning chime operate correctly?

Yes
GO to AJ2.

No
GO to Pinpoint Test AG (chime is always on) or GO to Pinpoint Test AH (chime is inoperative). Pinpoint Tests AG: The Chime Sounds When The Driver Door Is Ajar (Ignition In Off Mode And Headlamps Off) Pinpoint Tests AH: The Key-In-Ignition Warning Chime Is Inoperative

-------------------------------------------------
AJ2 CHECK THE TURN SIGNAL INDICATORS OPERATION

- Ignition ON.
- Verify the turn signal indicators operation.
- Do the turn signal indicators operate correctly?

Yes
GO to AJ3.

No
GO to Pinpoint Test Q. Pinpoint Test Q: The LH/RH Turn Or High Beam Indicator Is Never/Always On

-------------------------------------------------
AJ3 CHECK THE ODOMETER FOR CORRECT OPERATION

- Drive the vehicle and observe the odometer for correct operation.
- Does the odometer operate correctly?

Yes
INSTALL a new SJB. REFER to Multifunction Electronic Modules Smart Junction Box (SJB). TEST the system for normal operation.

No
GO to Pinpoint Test G. Pinpoint Test G: The Odometer Is Inoperative

-------------------------------------------------