Selector Lever - Paddle Shift

Selector Lever - Paddle Shift

1. Remove the driver air bag module.

2. NOTE: Rotate the steering wheel to access the top 2 screws.
Remove the 3 steering wheel switch trim bezel screws.






3. Disconnect the steering wheel switch electrical connectors.

4. Remove the steering wheel switch trim.





5. NOTE: RH side shown, LH side similar.
Remove the paddle shifter.

1. Disconnect the paddle shifter.

2. Remove the 2 bolts and the paddle shifter.
- To install, tighten to 5 Nm (44 lb-in).






6. To install, reverse the removal procedure.