Inspection Procedure 1

Difficult Locking and Unlocking

STEP 1. Check the release cable routed correctly.

Q: Is the release cable routing condition good?

YES: Go to Step 2.

NO: Repair the release cable. Then go to Step 4.

STEP 2. Check the engagement of the hood latch and hood striker.

Q: Are the hood latch and hood striker engaged correctly?

YES: Go to Step 3.

NO: Adjust the hood latch and hood striker. Then go to Step 4.

STEP 3. Check for proper lubrication of release cable.

Q: Is the release cable properly lubricated?

YES: Go to Step 4.

NO: Lubricate, then go to Step 4.

STEP 4. Retest the system.

Q: Does the hood lock operate easily?

YES: The procedure is complete.

NO: Return to Step 1.