Front Door Window Glass: Testing and Inspection

FITTING INSPECTION
- Check that the glass fits securely into the glass run groove.
- Lower the glass slightly [approximately 10 to 20 mm (0.39 to 0.79 in)] and check that the clearance to the sash is parallel. If the clearance between the glass and sash is not parallel, loosen the regulator bolts, guide rail bolts, and glass and guide rail bolts to adjust the glass position.

Regulator and motor or crank assembly bolts : 5.7 N.m (0.58 kg-m, 50 in-lb)

Glass bolts : 6.1 N.m (0.62 kg-m, 54 in-lb)