P2119

DTC P2119

DTC Detecting Condition and Trouble Area






Wiring Diagram

Wiring Diagram:

DTC Confirmation Procedure

NOTE:
Make sure that the following conditions are satisfied when using this procedure.
- Battery voltage > 10 V
- 5.3 °C (42 °F) < ECT < 100.5 °C (203 °F)
- IAT < 5.3 °C (42 °F)

1. Turn ignition switch to ON position for 1 min. after releasing accelerator pedal.
2. Run engine at idle speed for 1 min.
3. Turn ignition switch to OFF position for 1 min.

DTC Troubleshooting

Step 1-6: