Installation

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (w/o Cool Box): INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart .

1. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY





(a) Attach the 2 claws.
(b) Install the console box with the 4 bolts and 2 screws.
2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY






(a) Connect the connectors and 2 clamps.
(b) Attach the 8 claws to install the end panel.
3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY






(a) Connect the connectors.
(b) Attach the 14 claws to install the console panel.
4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY






(a) Attach the 4 claws to install the box.
5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY






(a) Attach the 9 claws to install the panel.
6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY






(a) Connect the connectors.
(b) Attach the 7 claws to install the panel.
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY






(a) Install the shift lever knob and twist it in the direction indicated by the arrow.
8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH






(a) Attach the 7 claws to install the panel pad.
(b) Install the screw.
(c) Install the clip.
9. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION






(a) Attach the 7 claws to install the panel cushion.
10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH






(a) Connect the connectors and 2 clamps.
(b) Attach the 8 claws to install the panel pad.
(c) Install the screw.
(d) Install the clip.
11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION






(a) Attach the 7 claws to install the panel cushion.