Installation

WIPER / WASHER: HEADLIGHT CLEANER MOTOR: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY






(a) Install the headlight cleaner motor and pump together with the gasket in the direction shown in the illustration.
HINT: Make sure the gasket is positioned as shown in the illustration.

(b) Connect the connector.
2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY






(a) Temporarily install the windshield washer jar with the 4 bolts.
(b) Tighten the 4 bolts in the order shown in the illustration to install the windshield washer jar.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Connect the headlight cleaner hose to the headlight cleaner motor and pump.






(d) Connect the 2 connectors.
(e) Attach the clamp.
3. INSTALL WASHER INLET SUB-ASSEMBLY Installation

4. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID Installation

5. INSTALL FRONT FENDER LINER LH Installation

6. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH

7. INSTALL SIDE STEP ASSEMBLY LH Installation

8. INSTALL FRONT FENDER MUDGUARD LH Installation