Removal

LIGHTING: ROOM LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.





2. REMOVE ROOM LIGHT LENS
(a) Using a screwdriver, detach the 4 claws and remove the lens.
HINT: Tape the screwdriver tip before use.

3. REMOVE ROOM LIGHT ASSEMBLY





(a) Using a screwdriver, detach the 4 claws and remove the 2 covers.
HINT: Tape the screwdriver tip before use.





(b) Remove the bulb from the room light switch base.





(c) Using a screwdriver, detach the 4 claws and remove the light.
HINT: Tape the screwdriver tip before use.





(d) Using a screwdriver, detach the 4 claws and remove the room light switch base.
HINT: Tape the screwdriver tip before use.