Installation

2TR-FE COOLING: THERMOSTAT: INSTALLATION

INSTALLATION





1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.
(b) Install the thermostat with the jiggle valve upward.
HINT: The jiggle valve may be set within 10° to either side of the prescribed position.





2. INSTALL WATER INLET
(a) Install a new gasket and the water inlet with the bolt and 2 nuts.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
3. ADD ENGINE COOLANT Service and Repair
4. CHECK FOR ENGINE COOLANT LEAKAGE Testing and Inspection