Removal

2UZ-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and setting. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 ENGINE UNDER COVER Replacement
3. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY
(a) Disconnect the sender gauge connector.





(b) Remove the sender gauge.