Removal

WIPER AND WASHER: WIPER SWITCH: REMOVAL

REMOVAL

1. REMOVE LOWER STEERING COLUMN COVER
(a) for Manual Tilt and Telescopic:
(1) Operate the tilt and telescopic lever to fully extend and lower the steering column.
(b) for Power Tilt and Telescopic:
(1) Turn the ignition switch ON. Operate the tilt and telescopic switch to fully extend and lower the steering column.

fig_refty09tundrG-E146419

(c) While turning the steering wheel to the right and left, remove the 2 screws and lower steering column cover.
(d) Detach the 2 claws to remove the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.

2. REMOVE UPPER STEERING COLUMN COVER

fig_refty09tundrG-E146420

(a) Detach the 4 clips.
(b) Detach the claw to remove the upper steering column cover.
3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

fig_refty09tundrG-E146421

(a) Disconnect the 2 connectors.
(b) Detach the claw and remove the wiper switch.
NOTE: Do not push the claw with excessive force as it may brake.