Installation

2AR-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL THERMOSTAT

(a) Install a new gasket to the thermostat.

(b) Install the thermostat with the jiggle valve facing upward.





HINT
The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

(a) Install the water inlet with the 2 nuts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)





3. CONNECT NO. 2 RADIATOR HOSE Installation

4. INSTALL GENERATOR ASSEMBLY

(a) Install the generator assembly Installation.

5. INSTALL FAN & GENERATOR V BELT Installation

6. ADD ENGINE COOLANT Service and Repair

7. INSPECT FOR COOLANT LEAK Testing and Inspection

8. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

9. INSTALL REAR ENGINE UNDER COVER RH Installation

10. INSTALL NO. 1 ENGINE UNDER COVER Installation

11. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation